PANEL PROCESSING • WOOD • NARROW PANELS DOWN TO 40 MM • PUR GLUE SYSTEM • PRE-MILLING EDGES • EDGEBANDING
40 mm
Min. panel width
10–60 mm
Panel thickness
20 m/min
Max feed speed
PUR
Quick-melt glue
Overview
Why the AFS 559-40
The AFS 559-40 is an automatic edgebander built for cabinet manufacturers processing narrow components alongside everyday panel work. With capability down to 40mm wide, a quick-melt PUR glue system and pneumatic two-position finishing, it combines flexible production with consistent edge quality.Planning narrow-panel edging? Read our edgebander safety and selection guide alongside the AFS 559-40 specifications.
Key features
40mm Narrow Panel Capability: Process narrow components from 40mm wide and 120mm long, with panel thicknesses from 10mm to 60mm.
Productive Feeding: Select 15, 18 or 20m/min feed speeds. A 4kW conveyor motor and four-wheel pressure system support stable panel movement and bonding.
Pre-Milling & PUR Processing: The 3.7kW diamond pre-milling unit prepares the edge before the quick-melt glue system applies adhesive. The system supports both EVA and PUR.
Pneumatic Two-Position Finishing: Fine trimming, two-motor corner rounding and radius scraping adjust between edging thicknesses for faster setup. Floating flat scrapers and twin buffing wheels complete the finish.
Clear Control. Practical Maintenance.: PC touchscreen control, automatic lubrication, front and rear cleaning sprays, tracing bearings for notch and hinge-hole work, and dual-channel interlocked safety support daily production.
Photos
Specifications
MODEL:
AFS 559-40
APPLICATION
Panel edgebanding; narrow components
MINIMUM WORKPIECE LENGTH
120 mm
MINIMUM WORKPIECE WIDTH
40 mm
WORKPIECE THICKNESS
10–60 mm
EDGE TAPE WIDTH
13–63 mm
EDGE TAPE THICKNESS
0.4–3.0 mm
FEED SPEED
15 / 18 / 20 m/min
PRE-MILLING UNIT
3.7 kW
CONVEYOR MOTOR
4 kW
GLUE SYSTEM
Quick-melt PUR glue system; EVA compatible
PRESSURE SYSTEM
Four-wheel pressure rollers
FINE TRIMMING
Pneumatic two-position adjustment
CORNER ROUNDING
Two motors; pneumatic two-position adjustment
RADIUS SCRAPING
Pneumatic two-position radius scrapers
FLAT SCRAPING
Pneumatic floating flat scraper
CLEANING SYSTEM
Front and rear cleaning sprays
BUFFING UNIT
Twin buffing wheels
NOTCH & HINGE-HOLE PROCESSING
Tracing bearings fitted
CONTROL SYSTEM
PC touchscreen
SAFETY SYSTEM
Dual-channel safety module with interlock switch
AUTOMATIC LUBRICATION
Included
WORKING AIR PRESSURE
0.65 MPa
Specification sheet
Download the AFS 559-40 specifications
Get the full specification sheet as a PDF, including dimensions, power requirements and options. Complete a short form and the PDF unlocks straight away.
