Explore AFS-568 PRO servo-controlled edgebanding for cabinet production, with 18–23m/min feed speeds and PUR/EVA gluing. Get advice from our Mexican team.
The AFS 568 PRO brings servo-controlled finishing, a top feed belt and an enclosed adhesive delivery system together in one automatic edgebander. Built for professional cabinet and furniture production, it offers precise setup, stable panel handling and efficient changeovers across different edge thicknesses.Comparing production edgebanders? Read our edgebander safety and selection guide before confirming your machine requirements.
Key features
Windows PC & Pendant Control: A large widescreen touchscreen provides clear machine control. An internal pendant touchscreen gives operators convenient access to servo-unit settings.
Top Feed Belt System: A continuous upper belt applies even pressure for smooth, stable feeding through the working units, including delicate and high-gloss panels.
Closed PUR / EVA Glue System: A plunger feeds adhesive through a heated hose directly to the glue head. The enclosed system removes the traditional glue pot and supports efficient adhesive and colour changeovers.
Servo Multi-Radius Finishing: Trimming and radius scraping automatically adjust for 1mm, 1.5mm and 2mm edge tape. Nesting tracers help the units work around hinge holes.
Prepared, Bonded & Finished: Servo infeed positioning, pre-milling and infrared edge heating prepare the panel. The pressure zone, end saws, corner rounding, flat scraping and buffing complete the process.
Built for Daily Production: Automatic thickness positioning, timed lubrication, multi-point cleaning sprays and a stress-relieved steel frame support consistent operation at 18–23m/min.
Photos
Specifications
MODEL:
AFS 568 PRO
APPLICATION
Panel edgebanding
EDGE TAPE THICKNESS
0.4–3 mm
PANEL THICKNESS
10–60 mm
MINIMUM PANEL WIDTH
60 mm
MINIMUM PANEL LENGTH
120 mm
FEED SPEED
18–23 m/min
CONTROL SYSTEM
Windows PC touchscreen; internal pendant control
PANEL PRESSURE SYSTEM
Continuous top feed belt
GLUE SYSTEM
Closed PUR / EVA system; heated hose and plunger feed
INFEED FENCE
Servo positioned
PRE-MILLING
Diamond cutters; 3.7 kW motor
EDGE PREHEATING
Infrared heating lamp
PRESSURE ZONE
Four heavy-duty pressure wheels and one rubber wheel
END TRIMMING
Dual 0.37 kW motors
RADIUS TRIMMING & SCRAPING
Servo adjustment for 1 / 1.5 / 2 mm edging
CORNER ROUNDING
Automatic positioning
FLAT SCRAPING
Floating flat scrapers
BUFFING
Top and bottom polishing motors
CLEANING SPRAY
Pre-milling, glue roller and buffing positions
AUTOMATIC LUBRICATION
Timed system
ELECTRICAL SUPPLY
220 V / 60 Hz / three phase
INSTALLED POWER
Approximately 18–22 kW
WORKING AIR PRESSURE
0.6–0.8 MPa
MACHINE WEIGHT
Approximately 3,000 kg
MACHINE DIMENSIONS
Approximately 6,815 × 900 × 1,700 mm
Specification sheet
Download the AFS 568 PRO specifications
Get the full specification sheet as a PDF, including dimensions, power requirements and options. Complete a short form and the PDF unlocks straight away.
